1.0 |
Place origin point A, draw axis |
|
2.0 |
Place point H on line A-2 at heel_height from A |
|
3.0 |
Draw line from point H to horizontal axis 2/3 of foot_length label end point J |
|
4.0 |
Place point X on line J-1 at 1/3 of foot_length from J |
|
5.0 |
Place point B on line X-1 at toe_allowance from X |
toe allowance |
6.0 |
Place point D on line A-H at 1/2 of heel_height from A |
|
7.0 |
Draw dashed line between D and J |
|
8.0 |
Draw dashed line between H and B |
|
9.0 |
Draw line at a 110.0° angle from point J on line J-D for 1/3 of ball_girth, label end point J0 |
|
10.0 |
Place point J1 on line J-J0 at 0.5 cm from J0 |
|
11.0 |
Draw line at a 110.0° angle from point B on line A-B for 2/3 of J-J1, label end point B1 |
|
12.0 |
Draw line at a 37.0° angle from point H on line H-B for 1/2 of short_heel, label end point H1 |
|
13.0 |
Draw solid line between H1 and J1 |
|
14.0 |
Draw solid line between J1 and B1 |
|
15.0 |
Extend line J1-B1 for 3.5 cm, label end point B2 |
|
26.0 |
Place point K on line H-J at 1/2 of H-J from J |
|
27.0 |
Place point R on line H-A at 2.0 cm from H |
|
28.0 |
Draw line at a -90.0° angle from point K on line J-H for 2.0 cm, label end point R1 |
|
29.0 |
Extend line J1-J for 2.5 cm, label end point R2 |
|
30.0 |
Extend line B-B1 for 1.0 cm, label end point R3 |
|
31.0 |
Draw solid line between R and R1 |
|
32.0 |
Draw solid line between R1 and R2 |
|
33.0 |
Draw solid line between R2 and R3 |
|
34.0 |
Draw solid line between R3 and B2 |
|
35.0 |
Place point G on line H-H1 at 1/2 of H-H1 from H |
|
35.5 |
Draw Vertical line from point G to horizontal axis label end point G1 |
|
37.0 |
Draw line at a 180.0° angle from point G on line G-G1 for 1/4 of short_heel, label end point L |
|
38.0 |
Draw line at a 83.0° angle from point L on line G-L for 1/4 of ankle, label end point L2 |
|
39.0 |
Extend line L-L2 for 1/4 of ankle, label end point L1 |
|
40.0 |
Draw solid line between L1 and H1 |
|
41.0 |
Draw solid line between L2 and H |
|
42.0 |
Place point L3 on line L2-H at 1/3 of L2-H from L2 |
|
43.0 |
Place point L4 on line L2-H at 2/3 of L2-H from L2 |
|
44.0 |
Draw line at a -90.0° angle from point L3 on line L2-H for 0.7 cm, label end point L5 |
|
45.0 |
Draw solid line between L2 and L5 |
|
46.0 |
Draw solid line between L5 and L4 |
|
1.0 |
Draw line parallel to A-2 starting at H1 for -2.5 inches, label end point r |
|
2.0 |
Extend line L-L1 for 1.0 inches, label end point r2 |
|
3.0 |
Place point P at the intersetion of L1-r2 and H1-r |
|
4.0 |
Place point P1 on line P-L1 at 1/2 of P-L1 from P |
|
4.5 |
Draw Vertical line from point P1 to horizontal axis label end point r3 |
|
6.0 |
Place point r4 at the intersetion of P1-r3 and J-H |
|
7.0 |
Extend line r3-P1 for -13.0 inches, label end point r5 |
|
8.0 |
Place point r6 at the intersetion of G-G1 and H-J |
|
9.0 |
Extend line G-L for -13.0 inches, label end point r7 |
|
10.0 |
Place point C on line r6-r7 at calf_height from r6 |
|
11.0 |
Place point U on line r6-r7 at boot_height from r6 |
|
12.0 |
Draw line at a 83.0° angle from point C on line L-U until it intersects with line P1-r5, label end point C1 |
|
13.0 |
Extend line C-C1 for 4.5 inches, label end point r8 |
|
14.0 |
Draw line at a 83.0° angle from point U on line L-U until it intersects with line P1-r5, label end point U1 |
|
15.0 |
Extend line U-U1 for 4.5 inches, label end point r9 |
|
16.0 |
Place point N on line U-U1 at 0.5 cm from U1 |
|
17.0 |
Draw solid line between N and C1 |
|
18.0 |
Place point U2 on line N-r9 at 1/2 of under_knee from N |
|
19.0 |
Place point C2 on line C1-r8 at 1/2 of calf from C1 |
|
20.0 |
Draw solid line between C1 and L1 |
|
21.0 |
Draw solid line between U2 and C2 |
|
22.0 |
Draw solid line between C2 and L2 |
|
23.0 |
Place point C3 on line C-C2 at 0.6 cm from C2 |
|
24.0 |
Draw solid line between K and H1 |
|
25.0 |
Place point F on line K-H1 at 1/3 of K-H1 from K |
|
26.0 |
Place point H3 on line H1-L1 at 3.0 cm from H1 |
|
27.0 |
Place point H2 on line H-L2 at 1/5 of short_heel from H |
|
28.0 |
Draw solid line between H2 and F |
|
29.0 |
Place point N1 on line N-U2 at 1/2 of N-U2 from N |
|
30.0 |
Draw solid line between N1 and L |
|
31.0 |
Place point S on line G-H1 at 2.5 cm from G |
|
32.0 |
Draw solid line between L and S |
|
33.0 |
Extend line L-S for 1.5 cm, label end point S1 |
|