| 1.0 |
Place origin point A, draw axis |
|
| 2.0 |
Place point H on line A-2 at heel_height from A |
|
| 3.0 |
Draw line from point H to horizontal axis 2/3 of foot_length label end point J |
|
| 4.0 |
Place point X on line J-1 at 1/3 of foot_length from J |
|
| 5.0 |
Place point B on line X-1 at toe_allowance from X |
|
| 6.0 |
Draw line at a 90.0° angle from point B on line A-B for 2.0 inches, label end point 3 |
|
| 7.0 |
Place point B1 on line B-3 at 1.5 cm from B |
|
| 8.0 |
Draw solid line between J and B1 |
|
| 9.0 |
Draw dashed line between H and B |
|
| 10.0 |
Draw line at a 90.0° angle from point H on line H-B for 4.0 inches, label end point Y1 |
|
| 11.0 |
Place point C5 on line H-Y1 at 7.3 cm from H |
|
| 12.0 |
Place point C2 on line H-Y1 at 2/5 of H-C5 from H |
|
| 13.0 |
Draw line at a 270.0° angle from point C5 on line H-Y1 for 3.0 inches, label end point 4 |
|
| 14.0 |
Draw line at a 37.0° angle from point H on line H-B for 1/2 of short_heel, label end point 5 |
|
| 15.0 |
Place point H1 on line H-5 at 10% of H-5 from 5 |
|
| 16.0 |
Draw line at a 90.0° angle from point J on line H-J for 1/5 of ball_girth, label end point J1 |
|
| 17.0 |
Place point 6 on line B1-3 at 1/2 of J-J1 from B1 |
|
| 18.0 |
Place point B2 on line 6-B1 at 0.5 cm from 6 |
|
| 19.0 |
Draw solid line between H1 and J1 |
|
| 20.0 |
Draw solid line between J1 and B2 |
|
| 21.0 |
Extend line J1-H1 for 10% of H-H1, label end point E |
|
| 22.0 |
Draw line parallel to H-H1 starting at E for 2.0 inches, label end point 7 |
|