| 1.0 |
Place origin point X, draw axis |
|
| 2.0 |
Place point A on line X-2 at 3.0 inches from X |
|
| 3.0 |
Draw line at a 270.0° angle from point A on line X-2 for foot_length, label end point B |
|
| 4.0 |
Extend line A-B for toe_allowance, label end point D |
|
| 5.0 |
Draw line at a 90.0° angle from point B on line A-B for 1.5 inches, label end point 3 |
|
| 6.0 |
Draw line at a 270.0° angle from point B on line A-B for 1.5 inches, label end point 4 |
|
| 7.0 |
Draw line at a 180.0° angle from point D on line D-B for 1.5 inches, label end point 5 |
|
| 8.0 |
Draw line at a 90.0° angle from point D on line D-B for 1.5 inches, label end point 6 |
|
| 9.0 |
Draw line at a 270.0° angle from point D on line D-B for 1.5 inches, label end point 7 |
|
| 10.0 |
Place point C on line A-B at 0.5 cm from A |
|
| 11.0 |
Draw line at a 90.0° angle from point C on line A-B for 1.5 inches, label end point 8 |
|
| 12.0 |
Draw line at a 270.0° angle from point C on line A-B for 1.5 inches, label end point 9 |
|
| 13.0 |
Place point J on line B-C at 2/3 of A-B from C |
|
| 14.0 |
Draw line at a 90.0° angle from point J on line A-B for 1.0 cm, label end point O |
|
| 15.0 |
Draw solid line between C and O |
|
| 16.0 |
Draw line at a 180.0° angle from point O on line C-O until it intersects with line B-3, label end point a |
|
| 17.0 |
Place point b on line C-O at 1/5 of A-B from C |
|
| 18.0 |
Place point H on line C-b at C-A from b |
|
| 19.0 |
Draw line at a 90.0° angle from point H on line C-H for 1/10 of short_heel, label end point c |
|
| 20.0 |
Place point H2 on line H-c at 0.1 cm from c |
|
| 21.0 |
Draw line at a 270.0° angle from point H on line C-H for 1/10 of short_heel, label end point d |
|
| 22.0 |
Place point H1 on line H-d at 0.1 cm from d |
|
| 23.0 |
Draw solid line between J and H1 |
|
| 24.0 |
Draw line at a 90.0° angle from point J on line H1-J for 2.0 inches, label end point e |
|
| 24.5 |
Place point f on line J-e at 1/6 of ball_girth from J |
|
| 25.0 |
Draw line at a 270.0° angle from point J on line J-H1 for 1/6 of ball_girth, label end point J1 |
|
| 26.0 |
Place point H4 on line H-H2 at 1/3 of H-H2 from H |
|
| 27.0 |
Draw solid line between H4 and J1 |
|
| 28.0 |
Place point J2 on line e-f at 1.0 cm from f |
|
| 29.0 |
Draw line at a 90.0° angle from point B on line A-B for 30% of J1-J2, label end point B2 |
|
| 30.0 |
Draw line at a 270.0° angle from point B on line A-B for 30% of J1-J2, label end point B1 |
|
| 31.0 |
Draw solid line between C and H2 |
|
| 32.0 |
Draw solid line between H2 and J2 |
|
| 33.0 |
Draw solid line between J2 and B2 |
|
| 34.0 |
Draw solid line between B2 and D |
|
| 35.0 |
Draw solid line between C and H1 |
|
| 36.0 |
Draw solid line between J1 and B1 |
|
| 37.0 |
Draw solid line between B1 and D |
|
| 38.0 |
Place point R at the intersetion of J1-H4 and H1-J |
|
| 39.0 |
Place point R1 on line J2-H2 at 50% of J2-H2 from J2 |
|
| 40.0 |
Draw dashed line between R and R1 |
|
| 41.0 |
Place point R3 on line R-R1 at 0.3 cm from R |
|
| 42.0 |
Place point R4 on line R-R1 at 0.3 cm from R1 |
|
| 43.0 |
Draw dashed line between H1 and R3 |
|
| 44.0 |
Draw dashed line between R3 and J1 |
|
| 45.0 |
Draw dashed line between H2 and R4 |
|
| 46.0 |
Draw dashed line between R4 and J2 |
|