1.0 |
Place origin point A, draw axis |
|
2.0 |
Place point H on line A-2 at heel_height from A |
|
3.0 |
Draw line from point H to horizontal axis 2/3 of foot_length label end point J |
|
4.0 |
Place point X on line J-1 at 1/3 of foot_length from J |
|
5.0 |
Place point B on line X-1 at toe_allowance from X |
toe allowance |
6.0 |
Place point D on line A-H at 1/2 of heel_height from A |
|
7.0 |
Draw dashed line between D and J |
|
8.0 |
Draw dashed line between H and B |
|
9.0 |
Draw line at a 110.0° angle from point J on line J-D for 1/3 of ball_girth, label end point J0 |
|
10.0 |
Place point J1 on line J-J0 at 0.5 cm from J0 |
|
11.0 |
Draw line at a 110.0° angle from point B on line A-B for 2/3 of J-J1, label end point B1 |
|
12.0 |
Draw line at a 37.0° angle from point H on line H-B for 1/2 of short_heel, label end point H1 |
|
13.0 |
Draw solid line between H1 and J1 |
|
14.0 |
Draw solid line between J1 and B1 |
|
15.0 |
Extend line J1-B1 for 3.5 cm, label end point B2 |
|
16.0 |
Draw line at a 90.0° angle from point H on line H-J for 1/5 of short_heel, label end point C |
|
17.0 |
Place point J2 on line J-J1 at 1/2 of J-J1 from J |
|
18.0 |
Place point J3 on line J1-J2 at 0.5 cm from J2 |
|
19.0 |
Place point E on line J1-H1 at 4/5 of J1-H1 from J1 |
|
21.0 |
Draw solid line between J3 and C |
|
22.0 |
Draw line at a -97.0° angle from point E on line J1-H1 until it intersects with line J3-C, label end point E1 |
|
23.0 |
Draw dashed line between B1 and C |
|
24.0 |
Place point C0 on line B1-C at A-B from B1 |
|
25.0 |
Place point C1 on line B1-C0 at 0.5 cm from C0 |
|
26.0 |
Draw solid line between C1 and H |
|
27.0 |
Place point K on line H-J at 1/2 of H-J from J |
|
28.0 |
Place point R on line H-A at 2.0 cm from H |
|
29.0 |
Draw line at a -90.0° angle from point K on line J-H for 2.0 cm, label end point R1 |
|
30.0 |
Extend line J1-J for 2.5 cm, label end point R2 |
|
31.0 |
Extend line B-B1 for 0.5 cm, label end point R3 |
|
32.0 |
Draw solid line between R and R1 |
|
33.0 |
Draw solid line between R1 and R2 |
|
34.0 |
Draw solid line between R2 and R3 |
|
35.0 |
Draw solid line between R3 and B2 |
|
35.0 |
Place point K1 on line J-K at 1/4 of J-K from K |
|
36.0 |
Draw solid line between J1 and K1 |
|
37.0 |
Place point D1 on line J1-K1 at 1/2 of J1-K1 from J1 |
|
38.0 |
Draw solid line between J2 and D1 |
|
39.0 |
Draw line at a -90.0° angle from point J1 on line J1-E for 0.5 cm, label end point L1 |
book value is 4mm |
40.0 |
Draw line parallel to J1-E starting at L1 for J1-E, label end point L2 |
|
41.0 |
Draw line at a 180.0° angle from point J1 on line B1-J1 until it intersects with line E-E1, label end point E0 |
|
42.0 |
Extend line J1-E0 for 1.0 cm, label end point E2 |
|
43.0 |
Place point C2 on line H-C1 at 2/7 of H-C1 from C1 |
|
44.0 |
Draw line parallel to E1-C starting at C2 for 3.0 inches, label end point Et |
|
45.0 |
Place point C3 on line C1-J3 at C1-C2 from C1 |
|
46.0 |
Draw solid line between C3 and H |
|
47.0 |
Place point Ey on line J2-D1 at 1.0 cm from J2 |
|
48.0 |
Draw line parallel to J2-J1 starting at Ey for 1.0 cm, label end point E3 |
|
49.0 |
Place point M on line B1-J1 at 2/3 of B1-J1 from B1 |
|
50.0 |
Draw line at a -83.0° angle from point M on line B1-J1 until it intersects with line R2-R3, label end point M1 |
|
51.0 |
Place point M2 on line M-M1 at 1/2 of M-M1 from M |
|
52.0 |
Draw line at a 90.0° angle from point M2 on line M-M1 for 0.15 cm, label end point x |
|