1.0 |
Place origin point A, draw axis |
|
2.0 |
Place point H on line A-2 at heel_height from A |
|
3.0 |
Draw line from point H to horizontal axis 2/3 of foot_length label end point J |
|
4.0 |
Place point X on line J-1 at 1/3 of foot_length from J |
|
5.0 |
Place point B on line X-1 at toe_allowance from X |
toe allowance |
6.0 |
Place point D on line A-H at 1/2 of heel_height from A |
|
7.0 |
Draw dashed line between D and J |
|
8.0 |
Draw dashed line between H and B |
|
9.0 |
Draw line at a 110.0° angle from point J on line J-D for 1/3 of ball_girth, label end point J0 |
|
10.0 |
Place point J1 on line J-J0 at 0.5 cm from J0 |
|
11.0 |
Draw line at a 110.0° angle from point B on line A-B for 2/3 of J-J1, label end point B1 |
|
12.0 |
Draw line at a 37.0° angle from point H on line H-B for 1/2 of short_heel, label end point H1 |
|
13.0 |
Draw solid line between H1 and J1 |
|
14.0 |
Draw solid line between J1 and B1 |
|
15.0 |
Extend line J1-B1 for 3.5 cm, label end point B2 |
|
16.0 |
Draw line at a 90.0° angle from point H on line H-J for 1/5 of short_heel, label end point C |
|
17.0 |
Place point J2 on line J-J1 at 1/2 of J-J1 from J |
|
18.0 |
Place point J3 on line J1-J2 at 0.5 cm from J2 |
|
19.0 |
Place point E on line J1-H1 at 4/5 of J1-H1 from J1 |
|
21.0 |
Draw solid line between J3 and C |
|
22.0 |
Draw line at a -97.0° angle from point E on line J1-H1 until it intersects with line J3-C, label end point E1 |
|
23.0 |
Draw dashed line between B1 and C |
|
24.0 |
Place point C0 on line B1-C at A-B from B1 |
|
25.0 |
Place point C1 on line B1-C0 at 0.5 cm from C0 |
|
26.0 |
Draw solid line between C1 and H |
|
27.0 |
Place point K on line H-J at 1/2 of H-J from J |
|
28.0 |
Place point R on line H-A at 2.0 cm from H |
|
29.0 |
Draw line at a -90.0° angle from point K on line J-H for 2.0 cm, label end point R1 |
|
30.0 |
Extend line J1-J for 2.5 cm, label end point R2 |
|
31.0 |
Extend line B-B1 for 0.5 cm, label end point R3 |
|
32.0 |
Draw solid line between R and R1 |
|
33.0 |
Draw solid line between R1 and R2 |
|
34.0 |
Draw solid line between R2 and R3 |
|
35.0 |
Draw solid line between R3 and B2 |
|
4.0 |
Place point W on line J1-E at 1/2 of J1-E from J1 |
|
6.0 |
Place point N1 on line W-E at 1.25 cm from W |
|
7.0 |
Place point N2 on line J1-W at 1.25 cm from W |
|
11.0 |
Draw line at a 270.0° angle from point N1 on line N1-N2 for 7.0 cm, label end point N3 |
|
12.0 |
Draw line at a 270.0° angle from point N2 on line N1-N2 for 7.0 cm, label end point N4 |
|
13.0 |
Draw dashed line between N3 and N4 |
|
14.0 |
Draw line at a 90.0° angle from point J1 on line J1-B1 until it intersects with line J-B, label end point J4 |
|
15.0 |
Draw line at a 180.0° angle from point N4 on line N2-N4 until it intersects with line J-H, label end point P |
|
16.0 |
Place point F on line J1-J4 at 1/2 of J1-J4 from J1 |
|
17.0 |
Place point T1 on line N2-N4 at 0.8 cm from N2 |
|
18.0 |
Draw line at a 90.0° angle from point T1 on line N2-N4 until it intersects with line N1-N3, label end point T2 |
|
19.0 |
Draw dashed line between T1 and F |
|
20.0 |
Draw dashed line between F and P |
|
21.0 |
Draw line at a 180.0° angle from point J1 on line B1-J1 until it intersects with line E-E1, label end point T3 |
|