| 1.0 |
Place origin point A, draw axis |
|
| 2.0 |
Place point H on line A-2 at heel_height from A |
|
| 3.0 |
Draw line from point H to horizontal axis 2/3 of foot_length label end point J |
|
| 4.0 |
Place point X on line J-1 at 1/3 of foot_length from J |
|
| 5.0 |
Place point B on line X-1 at toe_allowance from X |
|
| 6.0 |
Place point D on line A-H at 1/2 of heel_height from A |
|
| 7.0 |
Draw dashed line between D and J |
|
| 8.0 |
Draw dashed line between H and B |
|
| 9.0 |
Draw line at a 110.0° angle from point J on line J-D for 1/3 of ball_girth, label end point J0 |
|
| 10.0 |
Place point J1 on line J-J0 at 0.5 cm from J0 |
|
| 11.0 |
Draw line at a 110.0° angle from point B on line A-B for 2/3 of J-J1, label end point B1 |
|
| 12.0 |
Draw line at a 37.0° angle from point H on line H-B for 1/2 of short_heel, label end point H1 |
|
| 13.0 |
Draw solid line between H1 and J1 |
|
| 14.0 |
Draw solid line between J1 and B1 |
|
| 15.0 |
Extend line J1-B1 for 2.5 cm, label end point B2 |
different from mens |
| 16.0 |
Draw line at a 90.0° angle from point H on line H-J for 1/5 of short_heel, label end point C |
|
| 17.0 |
Place point J2 on line J-J1 at 1/2 of J-J1 from J |
|
| 18.0 |
Place point J3 on line J1-J2 at 0.5 cm from J2 |
|
| 19.0 |
Place point E on line J1-H1 at 2/3 of J1-H1 from J1 |
|
| 22.0 |
Draw dashed line between B1 and C |
|
| 23.0 |
Place point C1 on line B1-C at A-B from B1 |
no 5mm deduction as with mens |
| 23.5 |
Draw solid line between J3 and C1 |
|
| 24.0 |
Draw solid line between C1 and H |
|
| 24.5 |
Draw line at a -97.0° angle from point E on line J1-H1 until it intersects with line J3-C1, label end point E1 |
|
| 25.0 |
Place point K on line H-J at 1/2 of H-J from J |
|
| 26.0 |
Place point R on line H-A at 1.8 cm from H |
|
| 27.0 |
Draw line at a -90.0° angle from point K on line J-H for 2.0 cm, label end point R1 |
|
| 28.0 |
Extend line J1-J for 2.5 cm, label end point R2 |
|
| 29.0 |
Extend line B-B1 for 1.0 cm, label end point R3 |
|
| 30.0 |
Draw solid line between R and R1 |
|
| 31.0 |
Draw solid line between R1 and R2 |
|
| 32.0 |
Draw solid line between R2 and R3 |
|
| 33.0 |
Draw solid line between R3 and B2 |
END of STANDARD |
| 34.0 |
Place point K1 on line J-K at 2.5 cm from K |
|
| 35.0 |
Place point S on line J1-E at 0.8 cm from E |
|
| 36.0 |
Draw line at a -97.0° angle from point S on line J1-H1 for 2.5 inches, label end point S0 |
|
| 37.0 |
Draw line at a -97.0° angle from point E on line J1-H1 until it intersects with line B1-C1, label end point E0 |
|
| 38.0 |
Draw line at a -90.0° angle from point E0 on line E-E0 until it intersects with line S-S0, label end point S1 |
|
| 39.0 |
Place point S2 on line S1-S0 at 2.0 cm from S1 |
|
| 40.0 |
Draw line at a 90.0° angle from point S2 on line S-S2 for 0.5 inches, label end point S3 |
|
| 41.0 |
Extend line S-S2 for S-S2, label end point S4 |
|
| 42.0 |
Extend line E-E0 for S-S2, label end point S5 |
|
| 43.0 |
Draw solid line between S4 and S5 |
|
| 44.0 |
Place origin point Dd, draw axis |
|